The Electric Connection’s Blog

How to Upgrade Electrical Panel in a Home

Posted on | by K Hopkins

los angeles panel upgradeThe electrical panel in the home is where your electricity is distributed. Some electrical technicians describe the panel as a box of switches and wires. It is where you can find the individual breakers responsible for sending power to specific parts of the home. Most times when there is an electrical problem, homeowners use these switches to turn off or turn on the power.

Electrical panels are upgraded occasionally for several reasons. This upgrade can occur once in 10 years or as stated by a professional electrician. Some older panels are upgraded because of capacity. Modern panels now offer 200 amps to homes while older ones range between 60 and 100 amps. This is hardly sufficient for the contemporary homeowner who needs more power for appliances.

An electrical panel upgrade can be messy and expensive. If you are wondering how to upgrade the electrical panel in your home, here are two ways.

A Classic DIY
There are comprehensive texts that show homeowners how to upgrade the electric panel in the home. First, you would need to get a permit to attempt such a complex electrical project. If you do not do this, you might be persecuted for it. The next step is to equip yourself with screwdrivers, screws, torch, and a voltmeter. Open up the panel to study where the circuits lead to in your home. Turn off the mains electricity and remove all the circuits from the panel. Exercise extreme caution to avoid an electrical accident. Screw the new electrical panel to the wall and wire it up as before with the older panel. Put the circuit breakers in place. If you want to enlarge any circuit wires, wire them directly into the breaker. It is also possible to add more wires to extend the circuit. When this is complete, turn the power on. You would also need a building inspection to confirm that everything is working as it should.

A classic DIY is not impossible, but it is not the best option. Several things can go wrong when attempting to upgrade the electrical panel yourself. Look to the second method listed for a safer solution.

Hire a Professional Electrician
There are a few problems around the home a regular homeowner can handle. Things like a clogged sink may be easy to solve with a plunger or drain cleaner. Electricity is a job that requires training, skill, knowledge, and experience. Only a licensed electrician should work on electrical problems in the home. Upgrading the electrical panel is no small task. The panel is a powerful distributor of electricity that requires expertise from anyone. Taking on a DIY can lead to serious problems like an electrical fire, loss of lives and property. However, if a professional electrical is hired to upgrade the panel you can be sure of a safe process that leaves you with a reliable electrical system.

A licensed electrician from The Electric Connection would complete the upgrade in a little time and get it right so there are no further issues.

How to Rewire a House without Removing Drywall in Los Angeles

Posted on | by K Hopkins

open wall showing wires

Rest assured that you are not the first or the last to ask about rewiring a house without removing the drywall.

Rewiring a house can make your heart skip a bit. Homeowners react this way because aside from the high costs, an electrical rewiring project usually means tearing down walls and making a big mess that the exhausted homeowner is left to deal with. But time has proven that this process can be highly disruptive and even costlier for the homeowner.

Hence, some opt for repair services or using the old, faulty wiring as it is. Of course, this is dangerous and your electrician will advise you against it.

Thankfully, there is an alternative to tearing down walls. It is possible to rewire your home without removing the drywall. How? With skill, the right tools, and cost. To do this, you will need an experienced electrician or comprehensive information on the process.

An experienced electrician can inform you of the process and carry out the rewiring easily. The method used by the electrician is to find a crawlspace to feed the wire through the wall. We have discussed the stages below.

Planning and Preparatory Stage

After an inspection carried out by the electrician, planning becomes necessary. Not removing the drywall means you will need a new way to access the old wires and run new ones.

In this first stage, the electrical technician will require a plan showing or depicting the circuitry of the wires to be removed and another for the replacement.

Get a detailed plan of the old circuitry and what runs where. This drawing will help you see beyond the walls. Next, draw a similar plan for the new wires, and while it doesn’t have to be identical, seeing both plans helps know what to expect.

Determine the best route for removing the old wires and running new ones. Also, measure the amount of wires you will need.

Ideally, the only routes to take in rewiring your home without removing the drywall is through the attic or crawl space between floors. The attic usually has more space.

Part of preparing can also include creating room for the wires to slide through by removing some insulation. Any clutter that stands in the way has to be removed as well.

Discarding the Old Wiring

Before doing anything with the wires, be sure to shut off the power to the house. This is for your electrical safety as you work.

Removing the old wiring is also not as simple as just pulling them out. Some wires may be stapled to the wall and you could end up creating a short circuit problem. The wires must also be recycled properly.

Take out the old wiring from the crawl space. For tricky spots, you can pull the wires from inside the room and patch that drywall later.

With the old wiring out of the way, feed the new wires through a pre-cut opening in the wall.

Running the new wiring will probably be a two-man job, so be sure to have someone else to help.

Keep track of everything you do and follow the plan from before.

What can make a house rewire without removing the drywall successful?

  • Get help. You can hardly complete the process alone, even as a professional electrician. So have someone around to help feed the wires to you.
  • If you need to open drywall, patch the spot by covering it with paper joint tape and a joint compound. Leave the compound to dry for up to an hour.
  • Measure your wiring and make sure you have enough.
  • Go in with a bright flashlight.

Taking Precaution
Since you won’t be taking the regular technique of pulling down drywall for rewiring, you must ensure the new cables are extra tight or clamped down.

This rewiring technique is usually faster and more efficient as a two-man job, where one person feeds the wire and another catches it to secure the wires.

To get this done in your home, hire a skilled electrician with experience on the job. It is often better to consider referrals from people who had similar work done in their home.

It is important not to attempt this yourself or hire someone less skilled. You can reach us at The Electric Connection to put an end to your worries and complete this project. Our electrical technicians guarantee a stress-free rewiring for your home.

Learn more about house rewires:

What is involved?
How much does it cost?
How to prepare?

New Lighting Installation in Your Home

Posted on | by K Hopkins

recessed lighting installationAn electrical contractor will always tell you that good lighting is everything. These are not empty words as both homeowners and store owners can agree. The benefits and functions of light in any location are numerous. It is one of the primary reasons we use electricity. Lighting illuminates a space to give you clarity and vision, but in contemporary times they do even more. Lights can boost your business in a commercial building. They can improve security, productivity, and efficiency. Also, studies have shown that lights can be associated with good mood and a relaxed mind.

Lighting installations are performed by electrical technicians. These installations range from simple tasks such as light fixtures to more complex installations like recessed lighting. To give you some insight, here are different types of new lighting installations.

Track lighting
Like the name sounds, track lighting involves more than one light installed along a fixture. These lights can be controlled to light up any general direction. This makes them efficient. Track lighting can also add beauty to a place because of their unique placement.

Recessed lights
These lights are installed in the ceiling but are different because the fixtures cannot be seen. You can think of recessed lighting as a bulb pushed into the ceiling till all you can see is the light emanating from a circle above. There are a variety of recessed lights but you should hire a professional electrician to install them.

Wall lighting
Wall light fixtures protrude from drywall. They have to be hard-wired into your home. People mostly use wall lighting for aesthetic purposes. They also offer a wide variety in design.

Pendant lighting and Chandeliers
This is the category for chandeliers and other dropping light fixtures. They light up any space but also have decorative functions. Chandeliers have several forms and are often called premium lights. They might not drop to the ground but their exotic structures add length to these lights. Pendant lighting and chandeliers should be chosen and installed carefully because they are very visible and can set a theme for their location.

Under cabinet lights
You would want under cabinet lights installed in the kitchen to aid you during food preparation. They can also be any size and shape.

Tips for Choosing Lighting Installations in the Home

  • Always consider the ceiling height when deciding what installations to use. Low ceilings work better with recessed lights and not pendant lights.
  • It is important to know your lighting installations plan before construction of your home. This way the structure doesn’t deprive you of the fixtures you desire. However, if you live in a rented apartment, your choices might be limited to following the already provided structure.
  • There is no rule against infusing creativity in your lighting installation plans. Discuss your ideas with the electrical contractor to know if they are possible.
  • Ensure that you think of function before aesthetics. Hence, your first lighting installations should be exterior lights, basement lights, lights in the stairs, and so on.

How Much Does it Cost to Rewire a House

Posted on | by K Hopkins

rewire older homeA large number of house fires are attributed to faulty wiring. Rewiring your home is the best way to ensure your electrical components are up to date and suitable to carry a modern-day house needs. Many homeowners worry about the costs and the stress of rewiring. Yes, you have to dig deep into your pockets to undertake this project. However, no matter the cost, a reliable electrical system that guarantees safety and efficiency is worth it. The question some homeowners like to ask before they proceed with this project is, how much does it cost to rewire a house. We will discuss all the factors involved with this.

When is rewiring important?
Generally, house rewiring is a necessity in old homes. This is because older homes use less powerful panels that may be unsuitable for the needs of contemporary homes. Also, the electrical components of an old home may be worn out and outdated. They can emit radiations and heat which increases the risk of a house fire.

When circuit breakers trip frequently or fuse blow up in the home, it is a sign of faulty wiring.

If the outlets in the home are warm or hot to touch, emanating burning smell and crackling sounds, or causing electrical shocks, then you need to call a professional electrician immediately.

How do you confirm?

Every homeowner would want to know that they are safe in their home. Regardless of if you experience any of the warning signs above, it is still important to always confirm electrical safety. Routine inspections from a licensed electrician are all you need to determine if you need rewiring or not. When you live in your own home, you can have electrical inspections every ten years. This is different when you are a landlord with a rented property or the tenant. An electrician should inspect such homes at intervals of five years.

Factors that make up the final cost of rewiring

An electrician wouldn’t just give you any quote. There are factors involved which is why an inspection is also necessary before pricing. Here are the things that will be considered for your house rewiring quote

  • The size of your home
    A bigger home will typically cost more to rewire as it would take up more materials and time.
  • Demolition required
    In some homes, it is necessary to tear down existing structures. This labor will be reflected in the cost.
  • Materials cost
    The electrical technicians will cost the types of materials used and include this in the final price.
  • Empty house or occupied house
    Some electricians have a fee to represent this because working in an empty home is faster.
  • Ease or difficulty of the project
    If the previous electrical contractor did a terrible job or if your wiring is extremely damaged, it can impact the ease with which the electrician would work. This will be accounted for as well.

Get a house rewire quote

A small home with basic needs may cost around $1500 to $3000, while larger homes with varying needs can range from $4000 to $10, 000+. In order to get an accurate quote, you will need to consult with an electrician.

Fortunately, The Electric Connection has made it easy to get a house rewire quote. Simply visit this page and answer a few questions and a house rewire quote will be emailed to you!

Are Panel Upgrades Necessary?

Posted on | by K Hopkins

Panel upgrades are large projects. They require the expertise of a professional electrician and a good investment in funds. The electrical panels of a home contribute to its overall efficiency. In this modern age, we all rely so much on power to complete day-to-day activities. This power is distributed by the electrical panel of a home or building.

Like all electrical components, the electrical panel can require upgrade or changes. It is subject to fault, wear and tear. Some homeowners try to avoid upgrading the panel and keep using repairs as a shortcut. This is dangerous to lives and property. If you are not convinced about the need for panel upgrades, read on to learn why it is really necessary.

  • Safety
    Unlike cars, bicycles, and other material objects you cannot use an electrical panel to its breaking point. An old or faulty panel is dangerous and difficult to operate. It becomes problematic and prone to electrical issues like heating or sparking. They also increase the risks of house fires and damaged appliances. To avoid home accidents, it is necessary to upgrade old or malfunctioning panels.
  • Convenience
    There are times when you need to make changes to the appliances you use in the home or your lighting preferences. Without a functional panel, it is impossible to enjoy such convenience. Your current panel might not have the capacity to power your home with the new requirements for power. This will lead to frequent tripping which is always frustrating.
  • Value for your home
    An upgraded electrical panel adds value to your home. It makes it attractive to investors and home buyers in the future. No one will be interested in a home with an old panel or a faulty one.
  • Eliminate electrical problems
    Flickering lights, tripping breakers, smoking outlets, warm outlets, and so on are frustrating and worrying electrical problems. An upgraded panel can eliminate these issues. The panel helps to ensure the safe supply of electricity and no electrical hazards in the home.
  • Saves you money during remodeling
    An upgraded panel saves homeowners money, during a remodeling project. There will be no need to upgrade the panel after carrying out a remodeling project in the home if this is already done. This will save homeowners from investing so much on a single project.

How to upgrade the electrical panel

An upgrade is only necessary when you experience signs of a fault in the electrical wiring. It is also carried out when you need to move from a 60-100 amp to a 200amp capacity panel. Ensure that you hire an electrical technician to inspect the house and carry out the upgrade. The project usually costs a substantial sum but takes less than a day to be completed.

Can Electric Vehicles Use HOV Lanes?

Posted on | by K Hopkins

los angeles ev charger installationHigh-occupancy vehicle lane which is popularly known as HOV lanes is a traffic lane restricted and reserved for use by vehicles with a driver and one or more passengers. The minimum number of occupants is 2 to 3. In simple terms, the aim of this traffic lane is to get as many people off the road as possible to reduce traffic and air pollution.

There are over 126 HOV facilities across the United States. These lanes are not as effective as intended on most days, but they remain in use. They do help to save time during traffic congestion.

The principles behind HOV lanes exempt certain cars from using them. These vehicles include motorcycles, law enforcement vehicles, charter buses, some low emission vehicles and single occupancy vehicles paying a toll. The vehicles allowed on high-occupancy vehicle lanes are battery electric vehicle (BEV), fuel cell vehicles (FCV), and carpool, vanpool, and transit buses.

Electric vehicles are becoming more popular by the day. In most jurisdictions, they are allowed on HOV lanes. The benefits of this for drivers are:

  • Spend less time in traffic
    Fuel run vehicles have the ability to withstand traffic congestion, but this is different for electric cars. The stop-and-go traffic routine would reduce the car’s batteries. Hence, it helps for electric car drivers to be included in the use of HOV lanes.
  • Promoting clean air and cars
    It’s no secret that electric cars emit no harmful gases. They are unique for their contribution to clean air and clean cars. Using HOV lanes is a perfect way to advertise the concept of electric cars to others. It is an effective way of stating the importance of electric cars.

To use the High-occupancy vehicle lanes, electric vehicle owners have to get a permit from the Department of Motor Vehicles. They would be given a sticker which is usually placed on the rear bumpers and rear fenders.

What Are The Alternatives to Rewiring a House

Posted on | by K Hopkins

los angeles house rewireHouse rewiring is something most homeowners don’t want to hear. It involves replacing and upgrading the home’s current wiring for several reasons. House rewiring can be pricey and messy for a lived-in home. The electricians have to access what is in place and change them.

Although it is not every homeowner’s favorite project, it is sometimes inevitable. Before we discuss further, it is important to know why rewiring is necessary.

  • If you are taking on a remodeling project. This can include extending or converting rooms in a home. This will alter the existing structure and require electrical rewiring to conform to electrical safety rules. If new appliances are fitted in the rooms, the house rewiring will be carried out to accommodate them.
  • If the home has not been rewired in the last 20 to 30 years. This is common in old homes. Many people choose old homes for a reason. Some want to feel connected to history or enjoy the homeliness that just oozes from such old houses. The downside to all of this is old electrical wiring. A professional electrician should inspect the electrical system of an old home to determine if it needs to be replaced.
  • If you want to improve convenience. Rewiring is usually required when the current house wiring seems unsafe. However, you can also do this for convenience. Adding new switches, outlets, appliances, and installations may require a house rewiring to accommodate them.

Are there any alternatives?

House rewiring is a big project. It costs money and creates a mess. Of course, there would be less to fix and clean up after if you haven’t moved into the house. The complexity of the project discourages some homeowners.

You might wonder if there are any alternatives to a complete house rewiring. The best option is to call for a survey. An electrical technician can survey your electrical system and tell you the status. If there are faulty outlets in your home, they would equally inform you if fixing them would cut down cost and solve the problem.

This remedial work should not be carried out without the opinion of a licensed electrician. The survey might cost a small fee but what is important is finding a good and honest electrician.

Ensure that after the survey, the remedial work is carried out by a professional electrician. Take personal measures such as creating dedicated sockets for larger appliances. You can also install fire alarms for increased safety.

Remember, that the ideal option for a faulty system is a full rewiring. You can only use a remedial process if the system is salvageable with a few fixes. This is meant to save cost and stress but make sure you weigh all options before making a choice.

The Electric Connection
You need trusted electricians to provide electrical services. At The Electric Connection we provide surveys, consultation, installation, and other services you may need. We can inform you of affordable ways to have a safe electrical system.

How to Choose an Electrician

Posted on | by K Hopkins

licensed insured electricianElectricity is a necessary part of our daily lives. It is important for day-to-day activities in the home and commercial buildings. To ensure that electrical systems in a building are safe and reliable, you would need a trustworthy, professional electrician.

An electrician provides installation, repairs, maintenance, and any other electrical service. There are numerous electrical contractors in your community or state. This is a good thing, but it makes it slightly difficult to find a good electrician. It is not ideal to hire an electrician near you without considering some factors. Here are a few effective ways to choose an electrician.

  1. License and Insurance
    The most important factor to look out for is if the electrician is licensed. A licensed electrician has both practical and theoretical experience in a wide range of electrical services. This will give you the assurance of their skills. Ask for a copy of the license and check to see that it is recent. It may also specify the type of service the electrician offers. Make sure what you need is included.

    Insurance is equally important to protect both the electrical contractor and yourself from anything that goes wrong in your home.

  2. Recommendations
    Choosing an electrician near you without a recommendation from someone is unwise. Ask trusted friends and neighbors for a recommendation to a good electrician. If you find one yourself, request references to past clients. You can call them to be certain they are genuine and the electrician is capable. You can also read their online reviews if the contractor has an online presence.
  3. Check teams
    Sometimes, the electrical service may require a team. If you hire from a company, the chances are they would send you more than one electrical contractor to get the job done faster. Make the effort to confirm how many electricians would be coming and if they are all insured and licensed.
  4. Value for money
    The cost of the service is a vital factor because you have to know what you can afford. Some electrical contractors can be expensive while others are affordable. Ask for a quote or an estimate before any work begins. Do not be quick to choose the electrician near you with the lowest cost because that does not guarantee quality.

    Weigh the prices carefully and support your choice with other factors. Some pricey electricians may be worth the extra cost.

  5. Professional attitude and communication
    Business is all about effective communication. A professional electrician should be able to display discipline and a professional attitude. They should dress properly, attend to your work with good workmanship and maintain effective communication. No one wants a sloppy contractor with a bad attitude in their home.
  6. Time
    Time is a relevant factor for commercial buildings and homes. How long will it take the electrician to complete your work? Confirm from the electrician before the work begins. Some electricians work faster than others, especially with a team. If you are confused on a few options of contractors, this can help you break the tie.

Can I Upgrade Electrical Panel Without Permit?

Posted on | by K Hopkins

hiring electriciansThe electrical panel is the center of electricity supply in a home or building. It is called several other names such as the distribution board and breaker panel. You can identify the electrical panel as a metal electrical service board, located outside the home, in the garage, or the utility room. It is a network of wires and switches.

Most people are a bit familiar with the electrical panel of their home. They recognize it as where you go to switch the power on after tripping the breaker. Others may know nothing about the electrical panel and are quick to call on a professional electrician for help.
Breaker panels usually last for as much as 25 to 40 years before needing any replacements or upgrades. However, the manner of use and appliances in the home can wear out the electrical panel faster.

You may need an upgrade when:

  • You stay in an old house
    A home between 20 to 30 years old might require an upgrade. The electrical panel may still top out 60 to 100 amps which are low compared to newer homes. 200 amps installs are now more in use.
  • You observe electrical problems
    These can range from several things like tripping lights, warm panel, burning outlets, and so on. Such electrical problems are signs of a fault in the breaker panel. They require the attention of a professional electrician as soon as possible.

Upgrading the electrical panel with or without a permit.
An electrical permit is important for any electrical work. This guarantees both customers and their insurance companies that the installations are safe and professionally done. You can install light fixtures and other minor electrical needs without a permit.

In some States, a permit allows homeowners to take on the project of upgrading the electrical panel themselves. This is dangerous and inadvisable.

As a homeowner, you may not understand the complexity of the electrical panel. It is not similar to other electrical installations, hence should only be handled by a licensed electrician. Unlike outlets, electrical panels always carry live electricity even when the breaker is shut off. Improper handling can lead to electric shocks, fire outbreak, loss of lives, and damage to appliances.

An electrical technician knows of all these dangers and has knowledge and experience to work on the electrical panel. They guarantee you safe wiring that lasts for a long time.

If you successfully upgrade the panel on your own, you would still miss out on installing new cables and an electrical meter. The licensed electrician will give you suggestions to save money on energy. They will also ensure that you know more about the local codes and the upgrade complies with current electrical regulations.

A licensed electrician’s work will take less time’ precisely about 8 – 10 hours to complete. It will also pass electrical inspections.

Final Thoughts on Permits

You should not perform any electrical wiring without a permit. Ensure that you have the experience and skill to do the job. If not, it is always wise to hire a professional electrician.

The Electric Connection of Los Angeles has trained electricians to perform panel upgrades. Please contact us today for more information on our services.

Recessed Lighting Installation

Posted on | by K Hopkins

pot lightingRecessed lighting are also known as downlights. They differ from regular lighting that drops from the ceiling. Recessed lighting is installed within the ceiling and only the shining light can be seen. They appear as a light shining from a hole in the ceiling.

These lights vary in size and shape like regular lights. They comprise of two visible parts called the trim and baffles. Trim refers to the metal or plastic circle that fits on the ceiling helping to secure it. The baffles are the inner insert that helps to reflect the light. The shape and form of the baffle would determine how the light is reflected.

A lot of buildings use recessed lighting instead of other types of lighting. Their installation requires an electrical technician to avoid problems. You can hire an electrician that offers recessed lighting installation near you. These lights are unique and suitable for movie theatres, stores, kitchens in homes, shower stalls, even schools.

The benefits of recessed lighting installations

  • Waterproof
    Unlike other light fixtures, recessed lighting are waterproof. This makes them suitable for a water-intensive environment like shower stalls. When they come in contact with water, they do not go bad or pose a threat.
  • Always in style
    As more houses are built, manufacturers continuously come up with new products or designs. Some light fixtures are recognized as relics of the past because later models replaced them. Recessed lights are different because they are unusual and trend-proof. They do not go out of style and this makes them a good option for commercial buildings.
  • No visible fixtures
    This is a valuable benefit of recessed lights. They make ceilings look neat and organized as the fixtures lay hidden within the ceiling. Other types of lights such as lamps and dropping ceiling lights have exposed fixtures which can be dangerous and give the ceiling a busy appearance.
  • Full room illumination
    Lights sometimes can reach only a limited space when installed, but with the proper recessed lighting installation near you, the room can become fully illuminated. This is highly beneficial.
  • Suitable for low ceilings
    There are some parts of the home such as basements, with a low ceiling. Regular light will not be suitable for such rooms. Recessed lighting is an ideal option for low ceilings because they occupy less space but illuminate the room as needed.

Why you need a professional for recessed lighting installation near you
There are DIY methods available for homeowners or property owners to attempt installing recessed lights themselves. However, it is always better to call an experienced electrician from The Electric Connection for your electrical services.

Recessed lighting has to be properly installed to ensure they are secured to the ceiling. There is also the matter of insulation. Some recessed lights need to be covered with insulation to prevent the heat given off from starting a fire or other problems. An electrical technician will professionally complete the installation within stipulated electrical codes. This guarantees durability and allows you to seek the opinion of the electrician for the appropriate recessed lights to install.